Camping Gaz Turbo 270 Conversion for Threaded Fuel Canisters
Part of my collection of Camoing Gaz Bleuet 206 and 270 stoves. |
Camping Gaz Bleuet 206 was my first backpacking stove. It ran on a pierceable butane and propane mixed cartridge. This was during the mid-'80s and at the time was available worldwide. The 206 was super easy to use, and each cartridge provided 6 hours of cooking time. Just turn the knob and light. There were only two downsides to the stove. Once you pierced the c206 190-gram canister, you could not remove the stove until all the fuel was used. Also, the butane and propane mixed canister would freeze in cold weather. While I never had an issue with the fuel freezing, I did have to prepare the stove in case it happened.
As a young Scout each year at Christmas, I would receive one or two new canisters of fuel in my stocking. Anytime I found the canisters on sale, I would purchase a couple at a time to stockpile my supply. While I can't get any of the canisters anymore, I still have a good stockpile of c206 190-gram canisters that will last me a while.
Years later, I purchased Camping Gaz Bleuet 270 Micro Stove, which used a sealable CV270 220-gram or the CV470 450-gram canister. The 270 was also super easy to use just like the Bleuet 206. But now, I could detach the stove from the fuel canister for easier packing. Still had the same freezing issue with the 270 stoves as the Bleuet 206. Another disadvantage to this stove was you could only use the Camping Gaz canister with this stove. All other stove manufacturers use a threaded connector canister.
Camping Gaz is Non-threaded (left) and the Coleman (right) is threaded like most modern canisters. |
Just within a year or two of purchasing the second stove. Coleman purchased the French company, and sometime around 2016 the canisters were no longer distributed in the United States.
My second stove is the Camping Gaz Bleuet 270 Micro Stove on the self-sealing canister. |
Every few years I would check online to see if the canisters could be sourced without any luck. But then I saw that folks were making conversions to be able to use the threaded fuel canisters. Great, it looked like my Bleuet 270 might be used again. But this ended up not being the case. I wanted to know how this was done, and it would be cool to use a Camping Gaz stove again.
With all the new modern-day stoves that just weigh a few grams, why go through the time, and money just to get an old stove up and running? Well, that's a fair question and one that I hope I can answer. The Camping Gaz model stoves I have were dependable and very easy to use. I was able to do more than just boil water for my backpacking meals. I was able to cook real meals on them while camping. If you think about it, most great outdoor adventures have a great meal with friends to go with them. It doesn't sit well with me that the fuel canisters cannot be sourced here in the United States but can be elsewhere.
If you are a fan of Camping Gaz stoves, or just like to read about how to make conversions, modifications, or hacks, then stick with me while I show you the process. The Bleuet 270 which looks like it would work will not! I needed to start with the Camping Gaz Turbo 270.
Camping Gaz Turbo 270 carrying case. |
I was able to source a Camping Gaz Turbo 270 stove online. I had no idea how old the stove was, how much it was used, or when it was used last.
All the parts that make up the Turbo 270. |
There are some differences between the Bleuet 270 and the Turbo 270 stoves. The most noticeable is the burner on the Turbo 270 is bigger. Also, the housing part that the on/off knob is attached to is different.
Next, I needed a donor stove for the valve that is needed for this conversion. The Coleman Peak 1 3001 series stove is what I am going to use for the donor. The stove can be easily found and runs generally under $20.
Coleman Peak 1 is needed as a donor. |
The Coleman Peak 1 is right out of the box. I was a little taken aback at the overall cheap quality of this stove.
Coleman Peak 1 out of the box. |
Step #1: Remove the red plastic housing.
One side of the plastic housing was removed. |
Step #2: Once the housing is off remove all other parts of the stove. What's that blue that I see?
All the parts of the stove. |
Step#3: Remove the black dummy cap from the blue turn Knob.
Guess what? Is that a Camping Gaz valve? |
Step #4: Unscrew the Turbo 270 burner head from the valve and replace it with the new one from the donor stove.
Turbo 270 with the new valve. |
Turbo 270 is attached to a new threaded fuel canister. |
Step #5: Turn the knob on and light. Note: I have the solid windscreen section in the back of the stove. That section should be over the knob.
After who knows how many years this stove was used, it started burning on the first light. |
There you go! I was able to take the stove that used a non-threaded fuel canister and convert it over to using threaded fuel canisters. I am sure this stove sat in someone's garage or gear closet for years. The stove fired up like it was used on a backpacking or canoeing trip last week. Just goes to show you how dependable of a canister stove the Turbo 270 is.
Update note: While it's not in the post and has been discussed in the comments. You will need to use the old jet with the conversion. The hole in the old jet is bigger than the new jet of Peak 1. You will need a 7mm socket to change the jet out. Warning- You can run the risk of damaging the jet during the removal process. The reader assumes the potential for damage during this conversion.
A reader left in the comments that you can do the exact conversion with a Campgaz Globetrotter stove. I have not independently confirmed that conversion. That gives me another reason to purchase a stove!
Navigate over to our other post on converting a Camping Gaz Bivouac 270 Lantern to threaded fuel canisters.
Now It's Your Turn-
The search terms that bring people to this post are many. I invite you to leave a comment. Did this post save your stove from the trash? Have you done a conversion of another Camping Gaz model? What was the first meal that you cooked on your stove?
Comments
You are welcome and thanks for the comment. Hope your stove will be able to good many more meals on it!
This conversion only works with the Turbo 270. The Camping Gaz Bleuet 206 stove burner head will not work with the valve from the Coleman Peak 1 stove. I haven't found that fix yet.
I don't believe my conversion will work for you. But looking at the owners manual regulator Assembly P/N 22185 looks to be what you need to attach to threaded caisters. You can find the manual on line. Hope that helps.
Interesting! I no longer have any 270 canisters, but how well does butane work with the stove since the 270 canister was a butane/propane mixture?
The short answer is I don't know. I researched some images of the Bleuet 470 HP which looks like a nice stove. It looks to me that the old stove burner would fit the new valve. But what I don't know if the valve would fit in the housing. If you could email me at navigatetoyouradventure@gmail.com I would be happy to help you.
Note: you do not have to remove the black knob cover from the new valve unless you want to, but you do want to replace the jet on the new valve with the original or the flame sputters a bit. Takes 1 minute to replace the jet.
I have a Lumostar C 270 lantern as well wich has been a favorite of mine. I will post back if a conversion is possible there as well.
Thank you for this post!
Following up, the conversion works perfectly for the Lumostar C 270 lantern as well! Happiness!
The new and old knob covers are identical and the original blue plastic collar on the lantern even fits on the new valve. :)
Again, you still want to swap in the old jet.
It should have come out with a 7mm "socket". I don't have any tips. If you haven't ruined the jet hold and it just the sides of the jet, all should not be lost. Wish you all the luck with it.
It should be self-explanatory. It looks like a brass hex nut. Be very careful getting them out. The brass is soft and they could be damaged. Another person left that comment on the lantern post.
Glad it worked out. Enjoy your stove!
Thanks in advance!
It is suggested to change the jet due to the burner size difference of the two stoves that are used for this project. This was added as a note to the post from comments left by someone who commented. It is hard to see if there is a diffence between the two jets.
I am not sure if not changing the jets would cause a safety issue. I went back and changed the jets on my stove and I have not had any issues with my stove.
Changing the jets is not hard but you do need a 7mm socket. You also have to be very carryful because the brass i soft and you can damage the jet.
Hope this answered your question.
But, alas, I have an old 206 that served me very well over many years. There's nothing like the sound of the stove cooking dinner in the wilderness after a day of hiking! I just got my stove out because of the approaching hurricane and the possibility of losing power and realized that I am finally out of gaz! Is there any hope that this stove can be converted or is it time to find a new stove?
Thanks.
I hope that the hurricane misses you. I still have a 206 and I am lucky to still have fuel for it. But unfortunately there is no way to convert the 206 to accept a different fuel canister. I think it's time for a new stove. Good luck!
Thanks for leaving a comment. It's funny how we what to see our Camping Gaz stoves light up again. Enjoy your stove!
For anyone thinking the Peak 1 Stove works anything like the Turbo 270, don't bother trying. The Turbo 270 is a portable blast furnace with a much larger burner. The 270 also has a well-designed wind screen and the flame never flickers and goes out all the time like the Peak One stove does. Make sure you change the "fuel jet" because the one from the Coleman Peak One stove isn't going to give you as much fuel power into the larger Turbo 270 burner. This conversion has brough new life to the Turbo 270 which is one of the best portable camp stoves ever made.
The 206 canisters are not compatible with the CV470. The 206 canisters are punctured by the 206 stove.
It's interesting that Coleman uses Gaz valves in their stoves. Hmmm
One thing I noticed on both the original valve of the 270 and the donor valve from the Coleman Peak 1 is that the part number "06F125" is clearly shown on both valves.
A bit of advice when removing the brass jet from either stove. When using a 7mm socket and wrench, make sure the socket stays firmly seated over the jet while applying slow, steady torque until it pops loose. I believe the jets are over torqued at the factory. Even one of my donor's brass jet had damaged corners right out of the box. So I had to be extra careful getting the jet off.
Remember, gentle, slow but steady pressure and the brass jet will pop loose with minimal deformity to the brass jet.
Again, many thanks for your conversion post.
In the 270 conversions, the valve and the pot stand are two different parts. I also think the burner head is much like the 206 burner head which is different than the 270 head.
The S200 is a cool-looking stove! Wish I could have been more helpful.
I do have 2 full c206 190g full canisters. Any idea what I should do with these as I have no 206 compatible stove to use them? I live in NW Arkansas.
Glad the article saved your stoves! Maybe, if you have a local outdoor FB or outdoor Co-OP group you could post them up there. I have a lot of visitors to this post, and maybe someone will see that you have them and reach out to you. I have about 11 canisters for my 206. Good luck!
Anyone have any similar issues with this??? Maybe Coleman does'nt let you change the jet on the Classic stove anymore??? Anyone able to do this conversion recently? Any assistance would be greatly appreciated. 20$ down the drain. Can't return it now that I've defaced it :).
That's a sweet deal! Glad it worked out for you. Thanks for the comment.
Reviewing images online. It looks like the 470HP valve is a one-piece unit. This will not work with this conversion.
I was looking for a solution but needed your direction to understand that I shouldn't take the adapter direction but rather replace the bottom part.
My name is Pete and I'm the guy who first started this trend with the conversion that you took excerpts from. I just want to clarify one comment you made.
The valve swap is not necessary for the stove, only for the Campingaz lantern.
The reason I pointed out using an 11mm socket is that some of these valves in the Campingaz mainly are screwed in so tight an open or adjustable wrench can slip easily stripping the brass jet. Don't ask me how I know..😁 Cheers, good artical.
Wanted to let you know that 5 years later and this post is still helping people. The Peak 1 in Canada isn't available anymore, now has been rebranded as the Coleman Classic 1. Different color plastic cover, Same Campingaz valve inside.
I just picked one up for $26 CDN ($8usd) at Walmart to rescue my Turbo 270. Thank you to this community for restoring my faith in the internet.
Dano
This is a great post! Please keep it up.
C206 cartridges all over and cheap enough there.
I will need to find a small burner stove if I want to make greek coffee here. It does not need to be cheap. Good is good.
Thank you in advance!